![]() ![]() Unregulated loads should be modeled accurately to reflect the actual expected energy consumption of the tenant project. comparison against a baseline tenant project that complies with Standard 90.1–2010, Appendix G, with errata but without addenda ( or a USGBC-approved equivalent standard for projects outside the U.S.).Įxception: the baseline project envelope must be modeled according to Table G3.1(5) (baseline), Sections a–e, and not Section f.ĭocument the energy modeling input assumptions for unregulated loads.inclusion of all energy consumption and costs within and associated with the tenant project and.compliance with the mandatory provisions of ANSI/ASHRAE/IESNA Standard 90.1–2010, with errata, ( or a USGBC-approved equivalent standard for projects outside the U.S.).The proposed design must meet the following criteria: ![]() Projects must meet the minimum percentage savings before application of renewable energy systems. ![]() Calculate the baseline according to ANSI/ASHRAE/IESNA Standard 90.1–2010, Appendix G, with errata ( or a USGBC-approved equivalent standard for projects outside the U.S.), using a simulation model for all tenant project energy use. The following contents are copied from reference guide,ĭemonstrate a 3% improvement in the proposed performance rating compared with the baseline performance rating for portions of the building within the tenant’s scope of work. I am doing energy model for one of our LEED CI Project under v4 rating system. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |